Centrifuge Calibration Record: Temperature, Time (5, 10, 15 min), and Rotational Speed (3 Tests per Speed)

This record documents the comprehensive performance verification of a centrifuge, covering three critical parameters — temperature, time, and rotational speed — to ensure accuracy and stability in routine laboratory use.

• Temperature Calibration: Internal chamber temperature was measured using a calibrated temperature sensor to verify heating or cooling performance remains within the specified tolerance.

• Time Calibration: Tests were conducted at 5, 10, and 15 minutes, with results compared to a standard stopwatch to check for acceptable deviations.

• Rotational Speed Calibration: Multiple common speeds (e.g., 3000 rpm, 5000 rpm, 8000 rpm) were each tested three times, comparing setpoints against measured values to evaluate accuracy and repeatability.

All calibrations were performed in accordance with ISO/IEC 17025 procedures by READY’s qualified engineers, using reference instruments traceable to national and international standards. The results confirm that the centrifuge meets specification requirements at all test points, ensuring reliable and reproducible laboratory outcomes.

For centrifuge calibration services or other laboratory instrument verification, please contact READY.
☎ Tel: +886-2-8228-0131
✉ Email: Ready_lab@outlook.com